This small module can be installed directly in a junction box or a lamp canopy. The power supply or other compatible AC components can be dimmed or switched directly. Available 0-10V or 1-10V control outputs can be used to dim or switch suitable drivers or ballasts. The additional sensor function can integrate all commercially available motion detectors, twilight switches, etc. that are equipped with an AC switching output and operate them as radio actuator and act as problem solver wherever there are no corresponding cables. Easy to use via pre-installed programs and functions. Control can be achieved with potential-free buttons (1-4) depending on the function. Since standard push buttons are used, you can integrate Quasar into any existing electrical installation. Configuration and operation is simple and intuitive as well as you can add countless additional functions with the QUASAR APP from Android or Apple.
- Stand-alone or networked operation
- Controllable via up to 4 potential-free buttons and / or smartphone app
- Adjustable and freely configureable:
- Dimming level, minimum and maximum brightness
- Programs, speed, time-/day-dependent switching cycles
- Overload, overheating, network, operation display
Technical Data
ELECTRICAL CHARACTERISTICS | |
---|---|
Input voltage | AC 210V-240V / 50Hz |
Power consumption | max. 150W |
Standby loss | W |
Max. load per channel | 5 Units (0-10V / 1-10V) |
Total maximum load | 150W (R) / 100W (C) |
Connection possibility | Screw Terminals |
ABSOLUTE MAXIMUM RATINGS | |
Working temperature | -20˚C – +50˚C |
IP rating | IP-20 |
LIFESPAN | |
No of switching cycles | 100,000 |
GENERAL CHARACTERISTICS | |
Channels | 1 |
Control signal | BT-Mesh or Analog |
Material | Plastic |
Color | Black |
Mounting | Designated split boxes |
DIMENSIONS & WEIGHT | |
Length | 56.5 mm |
Width | 38.5 mm |
Height | 22.3 mm |